YSM API 610 / ISO 13709 PRODUCT
YSM KZ is an end-suction Type OH2 process-pump platform for selected API 610 / ISO 13709 duties and verified Sulzer ZE / ZF replacement projects.
PRODUCT DATA
KZ belongs to the API 610 / ISO 13709 tree, not the ISO 5199 / ISO 2858 end-suction category.
| Parameter | YSM KZ series range |
|---|---|
| Capacity | Up to 2,600 m³/h |
| Head | Up to 300 m |
| Pressure | Up to 100 bar |
| Temperature | Up to 425°C |
| Standard / type | API 610 / ISO 13709, Type OH2 |
Final selection requires duty point, pressure, temperature, materials, seal arrangement, GA, nozzle orientation, footprint, rotation and driver information.
YSM KZ can be engineered for 100% replacement compatibility with corresponding verified Sulzer ZE / ZF configurations. Exact API 610, hydraulic, installation and dimensional interfaces are verified against the installed pump before manufacturing.
KZ is an end-suction Type OH2 platform for API 610 / ISO 13709 projects. Final construction, materials, seals, driver and interfaces follow the selected project specification.
Capacity, head, pressure, temperature, liquid and speed.
GA, nozzle orientation, baseplate, centerline, rotation and coupling.
Materials, seal, bearings, driver, drawings and inspection scope.
Send the installed ZE/ZF data, duty point and drawings for a project-specific proposal.
Project support can include casting development, precision machining, hydraulic geometry review, material control, assembly, dimensional inspection and testing when specified.
KZ belongs to the API 610 / ISO 13709 tree. For ISO 5199 / ISO 2858 duties, review the AC, DW and DN process-pump range.
Sulzer, Ahlstrom and referenced pump model designations are trademarks of their respective owners and are used only to identify installed equipment and replacement compatibility. YSM / ANSI Pumps Pro is an independent manufacturer and is not affiliated with, sponsored by or endorsed by Sulzer.
A ZE/ZF replacement must be reviewed as an installed API 610 / ISO 13709 pump system, not only as a hydraulic selection. Engineering review includes the duty point and process conditions together with nozzle orientation, centerline, baseplate, shaft and coupling arrangement, seal system, driver and purchaser documentation requirements.
KZ is the YSM platform for corresponding verified ZE/ZF configurations. Exact replacement compatibility applies only after the installed interfaces and configuration have been checked.
| Process | Capacity, head, pressure, temperature, liquid and speed |
|---|---|
| Hydraulic | Existing curve, operating range and NPSH information if available |
| Installation | GA, nozzle orientation, flange data, centerline, baseplate and footprint |
| Mechanical | Shaft, coupling, bearings and rotation |
| Seal | Seal type and arrangement |
| Driver | Motor/driver rating and speed |
| Materials | Existing and required materials |
| Quality | Required inspection, testing and documentation scope |
Verified ZE/ZF projects can be routed to the YSM KZ platform after exact configuration review. Legacy ZA installations remain model-specific and must not be automatically mapped to KZ from the model-family name alone.
Review ZA / ZE / ZF solutions · Compare the separate ISO route
