ANSI B73.1 aftermarket specialists
3196 replacement pumps & parts.
Verified for your model.
Replacement pumps and parts for Goulds 3196 ANSI process-pump configurations. Fit and material selection are reviewed against your model, frame and available dimensional information before production.
Engineering review included
Product overview
3196 pump assemblies and components, organized for replacement planning.
Start with the configuration you know. Each quotation is checked against frame, position number and material requirement before production begins.
Full assembly view
Replacement wet-end, frame and bearing housing combinations for 3196 configurations.
End-suction configuration
Common horizontal ANSI process pump layouts, reviewed against your model and mounting details.
Power-end assembly
Bearings, shafts, sleeves and oil-seal components for planned overhaul or repair.
Quick reference
Technical information where it helps a buying decision.
The page keeps engineering detail available, but presents it in the order maintenance buyers typically need it.
Compatible pump family
Goulds 3196 and related ANSI B73.1 configurations, subject to final verification.
Available parts
Wet-end components, shafts, sleeves, wear rings, seals and selected power-end parts.
Material options
From 316SS to high-alloy options for corrosion, abrasion and temperature requirements.
Documents supplied
MTR, PMI and dimensional reports are available when required by the order.
Part identification
Find the part you need—without guesswork.
Use the position number, OEM reference or pump model to start. Our team confirms final fit before production.
Material capability
Choose material for the actual service.
| Alloy | Typical service | Wet-end parts | Documentation | Availability |
|---|---|---|---|---|
| CF8M / 316SS | General chemical & food-grade service | Casing, impeller, cover | MTR 3.1 | Standard |
| CN7M / Alloy 20 | Sulfuric acid & pickling operations | Wet-end kits, rings | MTR + PMI | Made to order |
| CW6M / Hastelloy C-276 | Severe chloride & reducing acid service | Casing, impeller, cover | MTR + PMI | Made to order |
| Titanium Gr. 2 | Wet chlorine & oxidizing chlorides | Impeller, sleeve, rings | MTR + PMI | Engineered |
Technical reference
Evidence before promises.
Fit, metallurgy and critical dimensions are reviewed as part of the quotation process—not after an order is placed.
- 01Model & drawing reviewVerify frame, position number and interfaces.
- 02Material verificationTraceable heat data and PMI for high-alloy materials.
- 03Dimensional inspectionCritical fits checked before packing and shipment.
Request for quotation
Send what you have.
We’ll identify the rest.
Share a pump model, part number, nameplate photo or drawing. Our engineers will confirm interchangeability and recommend the right material.
- OEM, equivalent and replacement options
- Material and interchangeability review
- No commitment required
Drawings & documentation
Keep the technical proof close to the RFQ.
Procurement questions
What buyers usually need to confirm.
These answers replace repetitive sales language with the decision points a maintenance buyer actually needs.
Are the parts guaranteed to fit a Goulds 3196 pump?
Interchangeability is verified against the submitted model, frame, position number and available dimensional information before an order is accepted.
What if I only have a nameplate photo or a worn sample?
Send it with any available service details. Engineering will identify what can be confirmed and advise which additional dimensions or photos are needed.
Can you recommend a material for corrosive service?
Yes. Provide fluid, concentration, temperature and operating conditions. Material selection is reviewed by engineering rather than chosen from a generic online table.
Which inspection and material documents can be supplied?
Depending on the part and order requirement, documentation can include EN 10204 3.1 MTR, PMI, dimensional inspection and Certificate of Conformance.
Ready when you are
Need a verified 3196 replacement part?
Send a part number, pump model or drawing for an engineer-reviewed quotation.
Request a 3196 Parts QuoteManufacturer capability
Built for chemical-process pump replacement, not generic parts supply.
With more than 10 years of experience in pump engineering, manufacturing and aftermarket support, ANSI Pumps Pro supports maintenance teams with verified replacement solutions and material guidance.
ANSI process pumps
Replacement pumps and components for chemical-process applications with ANSI B73.1 configurations.
Coverage by verification
Support for Goulds 3196, LF3196, 3796 and 3996 configurations, subject to model, frame and dimensional review.
Wet-end materials
316SS, CD4MCu, Alloy 20, Hastelloy C, titanium, nickel alloys and cast steel options.
Engineer-reviewed RFQ
Confirm fit, metallurgy and documentation requirements before production is released.
Goulds, Durco, Mark III and other referenced trademarks are the property of their respective owners. ANSI Pumps Pro is not affiliated with or endorsed by those trademark owners; references are used solely to identify compatibility.