Global ANSI Pump Replacement Solutions Supplier

G3796 Self-Priming Process PumpInterchangeable Replacement for Goulds 3796

A non-OEM replacement solution for installed Goulds 3796 self-priming process pumps. Match the corresponding STi / MTi size, verify dimensional interfaces, hydraulic duty, materials and seal configuration, then request a replacement quotation.

Find My 3796 Replacement → Upload Nameplate for Quote

✓ 8 matching pump sizes ✓ STi / MTi frame route ✓ Dimensional fit review ✓ Complete pump + parts

Already Have a 3796 RFQ?

Send the Existing Model, Size or Nameplate

If your inquiry already includes a Goulds 3796 model, pump size, material, seal requirement or delivery target, send it directly. We will review the replacement configuration and prepare the commercial quotation scope.

Upload RFQ / Nameplate Paste My Specification

Goulds® and related model designations are used only to identify installed equipment and replacement requirements. ANSI Pumps Pro is an independent replacement pump and parts supplier and is not affiliated with or endorsed by the original equipment manufacturer.

G3796 self-priming replacement pump preview

G3796 · Self-Priming · Replacement Configuration

01 Existing Pump

Goulds 3796Start from model, size or nameplate.

02 Match

Size + FrameMap the corresponding STi / MTi configuration.

03 Verify

Fit + Duty + MaterialConfirm interfaces and operating requirement.

04 Supply

G3796 Pump / PartsQuote the reviewed replacement scope.

Replacement Model Finder

Find Your Existing Goulds 3796 Size

Choose the size on your existing pump. The page immediately maps it to the corresponding G3796 replacement route and shows the verified dimensional reference currently published on the page.

I only have a nameplate →

Selected replacement

G3796 1 × 1.5-6

Replacement route identified

Existing modelGoulds 3796 1 × 1.5-6

FrameSTi

Discharge1 in

Suction1.5 in

Dimensional reference — inches / mm

A15.5 / 394

B5 / 127

D7.5 / 191

E4 / 102

X7.25 / 184

Preliminary replacement screening only. Final dimensional fit is confirmed against the approved drawing and the existing installation before order.

Verify Interchangeability Request 1 × 1.5-6 Quote

3796 Model & Size Reference

Match Your Existing Goulds 3796 Size

Existing documentation may use different frame-generation references. Start with the model designation and pump size shown on the nameplate, drawing or purchase specification. ANSI Pumps Pro reviews the submitted reference against the applicable G3796 replacement configuration before quotation.

Existing 3796 reference	Size	Replacement review route	Quote
Goulds 3796 ST-series reference	1 × 1.5-6	G3796 1 × 1.5-6	Request This Size Quote
Goulds 3796 ST-series reference	1.5 × 1.5-8	G3796 1.5 × 1.5-8	Request This Size Quote
Goulds 3796 MT-series reference	2 × 2-10	G3796 2 × 2-10	Request This Size Quote
Goulds 3796 MT-series reference	3 × 3-10	G3796 3 × 3-10	Request This Size Quote
Goulds 3796 MT-series reference	4 × 4-10	G3796 4 × 4-10	Request This Size Quote
Goulds 3796 MT-series reference	3 × 3-13	G3796 3 × 3-13	Request This Size Quote
Goulds 3796 MT-series reference	4 × 4-13	G3796 4 × 4-13	Request This Size Quote
Goulds 3796 MT-series reference	6 × 6-13	G3796 6 × 6-13	Request This Size Quote

Have a 3796 MTX or MTi Reference?

Older purchase specifications, drawings and installed-equipment records may contain frame-generation references such as MTX, while later documentation may use MTi/i-FRAME terminology. Submit the exact designation shown on your equipment or RFQ. We will verify the required frame, size and installation interfaces before confirming the replacement.

3796 dimensional replacement review illustration

Interchangeability Proof

Will the G3796 Fit My Existing Installation?

The replacement is not judged from the model name alone. We match the corresponding size and frame, then verify the interfaces that determine whether the pump can replace the installed unit with controlled modification risk.

Pump size
Existing 3796 designation

STi / MTi frame
Correct frame configuration

Suction interface
Size and location

Discharge interface
Size and location

Mounting interface
Feet, base and centerline

Drive interface
Shaft, coupling and motor arrangement

Interchangeable does not mean “order from model name only.” Final dimensional fit, hydraulic duty, material and seal arrangement are confirmed before order.

Hydraulic confirmation

Confirm the Required Duty Before Final Selection

The replacement is confirmed against the selected pump size and the actual operating requirement. Send the required flow, head, speed or frequency, and suction conditions where available. The applicable curve and quotation scope will be reviewed for the selected configuration.

Selected size1 × 1.5-6 · STi

Curve reviewMatched to selected configuration

Self-priming dutySuction conditions reviewed

Engineering outputCurve + model + quotation scope

Required Flow

Required Head

Speed / Frequency

Static Suction Lift

Request Performance Curve Review

Materials & Seal Configuration

Define the Required Wet-End Material and Seal Arrangement

Select the material requested by your specification or describe the process conditions if material selection still requires review. Final component materials and seal arrangement are confirmed for the selected pump size before quotation release.

Requested Wet-End Material

Choose the specified material. Availability is confirmed for the selected size and configuration.

Seal Requirement Process Fluid Concentration / Chlorides if known Temperature Specific Gravity / Viscosity if relevant

Final component availability and seal arrangement are confirmed for the selected G3796 size, specified material and process conditions.

Check Selected Material →

Construction Items We Confirm

Component / item	RFQ handling
Casing / Wet End	Confirmed by selected size and requested material
Impeller	Confirmed by selected size and requested material
Seal Chamber / Cover	Confirmed for required seal arrangement
Shaft / Sleeve	Confirmed for requested construction
Mechanical Seal	Reviewed against fluid, temperature and arrangement
Fasteners / Trim	Defined in final quotation BOM where applicable

Engineering Proof

How the 3796 Self-Priming Arrangement Supports the Application

The self-priming casing retains the liquid required for the priming cycle and separates air from the pumped liquid during startup. Final suitability still depends on the selected size, suction arrangement and operating conditions.

Self-priming does not mean dry-running. The required priming charge and suction conditions must be confirmed for the actual system.

Primary Supply

Complete G3796 Replacement Pump

Submit the existing pump reference and required configuration. The quotation will define the reviewed pump size, construction, seal arrangement, supply scope and required technical documentation.

✓ Complete pump assembly✓ Selected wet-end construction✓ Seal configuration✓ Performance curve / technical documentation✓ Motor / coupling arrangement review✓ Approved drawing confirmation where applicable

Request Complete Pump Quote

Secondary Supply

3796 Replacement Parts

If the project requires supported individual parts instead of a complete pump, send the existing pump model, size, OEM part number, drawing or sample details where available. Standalone scope is limited to casing, impeller, applicable cover, shaft and selected drawing-based metallic seal components.

Send 3796 Part Number

Engineering Workflow

From Existing 3796 to Replacement Quote

STEP 01

Identify Existing Pump

Send the model, size, frame/reference, nameplate, serial number or drawing available from the installed unit.

STEP 02

Confirm Interchangeability

Review dimensional interfaces, hydraulic duty, construction, seal arrangement and installation requirements.

STEP 03

Define Supply Scope

Confirm complete pump, bare pump, wet end or supported individual parts and required documentation.

STEP 04

Receive Proposal

Receive the reviewed model/configuration, commercial quotation and required next-step documentation.

Commercial Quote Scope

What You Receive With the Pump Quotation

Procurement teams often need more than a model number. The quotation package should clearly identify the reviewed replacement configuration and the commercial information required to evaluate the purchase.

Pump Configuration

Reviewed model, size, construction and supply scope

Price

Unit pricing and quantity basis

Delivery

Quoted production lead time

Weight

Reference/net weight where applicable and final shipping weight when the quoted configuration is confirmed

Packing

Packing method and packing dimensions when available for the final shipment scope

Technical Documents

Performance curve, drawing and material/inspection documentation according to quotation scope

Weight note: Bare-pump reference weight is not the same as final gross shipping weight. Final shipping weight and packing dimensions are confirmed against the quoted configuration and packing scope.

Fast RFQ

Request a Goulds 3796 Replacement Quote

Start with the information already available in your RFQ, nameplate, drawing or pump specification. For an installed 3796, the fastest route is the existing-pump replacement form. Engineering will request additional operating data only when needed to confirm the final configuration.

Tell us what you are replacing

Choose the fastest path for your project. Existing 3796 replacement is the default.

"(Required)" indicates required fields

Replace Existing Goulds 3796

Your Name(Required)

Company(Required)

Business Email(Required)

Country(Required)

Paste Your RFQ / Pump Specification

Already have a purchasing description, BOM or pump specification? Paste it here exactly as received. You do not need to re-enter every detail below.

Existing Manufacturer / Brand

Existing Model

Existing 3796 Size

Frame / Designation if known

Quantity

Required Material

Seal Requirement

Seal Reference / Details

Process Fluid

Concentration / Chlorides if known

Temperature

Specific Gravity / Viscosity

Required Delivery

Procurement Requirement

ANSI Pumps Pro specializes in independent replacement pumps and components. If your specification requires genuine OEM supply only, select that option so the sales team can confirm whether the request can be supported before quotation.

What do you need with the quote?

Price

Delivery / Lead Time

Net / Reference Weight

Gross Shipping Weight

Packing Dimensions

Performance Curve

GA Drawing

Material Documentation

Inspection / Test Documentation

ANSI Pumps Pro specializes in independent replacement pumps and components. Your OEM-only requirement will be reviewed before quotation so the sales team can confirm whether the request can be supported.

Nameplate / GA Drawing / Datasheet

Drop files here or

Accepted file types: pdf, jpg, jpeg, png, webp, xls, xlsx, doc, docx, Max. file size: 50 MB.

Project Notes

Engineering will request additional duty or suction information only when needed to confirm the replacement configuration.

New Self-Priming Pump Selection

Your Name(Required)

Company(Required)

Business Email(Required)

Country(Required)

Phone / WhatsApp

Frequency / RPM

Required Flow(Required)

Required Head(Required)

Liquid / Concentration(Required)

Temperature

Specific Gravity / Viscosity

Solids

Static Suction Lift(Required)

Suction Pipe

Material

Seal

Motor

Process Datasheet / Sketch / Existing System Files

Drop files here or

Accepted file types: pdf, jpg, jpeg, png, webp, xls, xlsx, doc, docx, Max. file size: 50 MB.

Project Notes

This route is for a new duty rather than a direct installed-pump replacement.

This field is for validation purposes and should be left unchanged.

By submitting this form, you acknowledge that the information provided will be used to respond to your inquiry and provide related technical or commercial support. See our Privacy Policy.

FAQ

3796 Replacement Questions

Can the G3796 replace an installed Goulds 3796?

The page is intended for corresponding Goulds 3796 replacement reviews. Final interchangeability is confirmed against the submitted pump size/reference, installation interfaces, hydraulic duty, material and seal arrangement before order.

Can I request a quote with only a nameplate or existing RFQ?

Yes. Send the nameplate, RFQ, drawing, datasheet or the model and size information you already have. Engineering can request additional details only where needed for final confirmation.

Can you review a 3796 MTX or MTi reference?

Yes. Submit the exact frame/reference shown on the installed pump or purchasing document. The required frame, size and interfaces are verified during replacement review rather than assumed from the designation alone.

Can I request Alloy 20 construction?

Alloy 20 / CN7M can be submitted as the specified material requirement. Final component construction is confirmed for the selected size and seal arrangement during quotation review.

Can you review a single cartridge mechanical seal requirement?

Yes. Include the existing seal reference or required seal arrangement where available. Final seal selection is reviewed against the pump configuration, process fluid, temperature and operating conditions.

Will the quotation include shipping weight?

Shipping information can be included in the commercial quotation. Bare-pump reference weight and final gross shipping weight are different values; final shipping weight and packing dimensions are confirmed for the quoted configuration and packing scope.

What if my specification says no substitute or equivalent?

Select “Genuine OEM Only / No Substitute” in the RFQ form. ANSI Pumps Pro specializes in independent replacement pumps and components, so the requirement should be reviewed before quotation to confirm whether it can be supported.