STO
- OEM size
- Enter nameplate size
- G196 frame
- STX
- G196 size
- Confirmed after size review
MATCH ROUTE AVAILABLE
GLOBAL ANSI PUMP REPLACEMENT SOLUTIONS100% INTERCHANGEABLE REPLACEMENT
100% Interchangeable Summit 2196 Replacement Pump
Replace corresponding Summit 2196 ANSI pump sizes and frame configurations with a G196 replacement. Identify the existing STO, MTO, LTO or XLO configuration, then verify dimensional fit, hydraulic duty, materials and seal arrangement.
- ANSI / ASME B73.1
- Frame / Group Matched
- Dimensional Fit Review
- Engineering Verified
For corresponding ANSI/ASME B73.1 pump size and frame configurations. Final hydraulic duty, material, seal arrangement and site-specific interfaces are verified before quotation.
- 01
EXISTING PUMPSummit 2196
- 02
MATCHSize + STO / MTO / LTO / XLO
- 03
VERIFYDimensions + Duty + Material
- 04
SUPPLYComplete G196 / Parts
EXISTING PUMP MODEL FINDER
Which Summit 2196 Frame Are You Replacing?
Select the identification shown on the existing pump, then enter the exact pump size. Unverified configurations do not produce a fabricated match.
| OEM frame / group | OEM size | G196 frame | G196 size | Status |
|---|---|---|---|---|
| STO | Enter nameplate size | STX | Confirmed after size review | MATCH ROUTE AVAILABLE |
| MTO | Enter nameplate size | MTX | Confirmed after size review | MATCH ROUTE AVAILABLE |
| LTO | Enter nameplate size | LTX | Confirmed after size review | MATCH ROUTE AVAILABLE |
| XLO | Enter nameplate size | XLTX / engineering confirmation | Confirmed after drawing review | ENGINEERING REVIEW REQUIRED |
MTO
- OEM size
- Enter nameplate size
- G196 frame
- MTX
- G196 size
- Confirmed after size review
MATCH ROUTE AVAILABLE
LTO
- OEM size
- Enter nameplate size
- G196 frame
- LTX
- G196 size
- Confirmed after size review
MATCH ROUTE AVAILABLE
XLO
- OEM size
- Enter nameplate size
- G196 frame
- XLTX / engineering confirmation
- G196 size
- Confirmed after drawing review
ENGINEERING REVIEW REQUIRED
Engineering boundary
Published G196 replacement coverage is confirmed by frame and pump size. 17-inch and non-standard configurations require drawing and duty review before quotation.
ENGINEERING PROOF
What We Verify for Dimensional Interchangeability
Final fit is confirmed against the selected pump size, approved drawing and available installation data before order.
Suction flange / centerlineSize, location and piping relationship
Discharge flange / centerlineOrientation, height and connection
Shaft centerlineDriver and coupling alignment
Pump feetMounting and baseplate relationship
Shaft / coupling interfaceDrive interface and guard clearance
Baseplate relationshipConfirmed for the selected configuration
Dimensional Match
- ANSI size
- Frame / group
- Nozzle relationship
- Mounting interface
- Drive interface
Hydraulic Match
- Flow
- Head
- Speed
- Impeller
- Curve review
Construction Match
- Wet-end material
- Shaft / sleeve
- Seal chamber
- Mechanical seal
- Power end
HYDRAULIC DUTY VERIFICATION
Confirm Your Duty Point
Dimensional interchangeability and hydraulic selection are verified separately. Enter the available duty data for engineering curve review.
MATERIALS & CONSTRUCTION
Select Required Material
Company-level material capability is shown here. Final availability and exact grade for the selected pump size and service are confirmed during engineering review.
G196 SERIES REFERENCE ENVELOPE
Series limits, not every-size promises
Series maximum values are reference envelopes. Final performance is confirmed on the reviewed curve for the selected pump size, speed and impeller diameter.
- capacity
- Up to 7,000 US GPM / 1,590 m³/h
- head
- Up to 730 ft / 223 m
- pressure
- Up to 375 psig / 2,586 kPa
- temperature
- Up to 700°F / 371°C
- frames
- STX / MTX / LTX / XLTX
- standard
- ASME/ANSI B73.1
- impeller
- Open impeller / external adjustment
PRIMARY SUPPLY
Complete G196 Replacement Pump for Summit 2196
The reviewed model, duty, material, seal and installation interface package defines the quotation scope.
- Complete pump assembly
- Reviewed wet-end construction
- Seal arrangement
- Curve and technical documentation
- Motor and coupling review
- Approved drawing confirmation
HOW WE VERIFY YOUR REPLACEMENT
From Existing Pump to Reviewed Quotation
- 01Identify
Nameplate, model, size, frame/group and drawing.
- 02Confirm
Dimensions, duty, material, seal and site interfaces.
- 03Define Scope
Complete pump or reviewed replacement parts.
- 04Receive Proposal
Confirmed model, technical scope and quotation.
TECHNICAL FAQ
Summit 2196 Replacement Questions
Which G196 frame replaces Summit STO, MTO, LTO and XLO?
The published route used here is STO to STX, MTO to MTX and LTO to LTX. XLO and non-standard configurations require size, drawing and duty confirmation.
Can a Summit 2196 replacement reuse the existing piping and baseplate?
The corresponding ANSI route is checked for nozzle, centerline, mounting and baseplate relationships. Reuse is confirmed from the selected size and approved drawing, not from the model name alone.
Are 17-inch Summit 2196 configurations direct replacements?
Not automatically. A 17-inch or special configuration is marked Engineering Review Required until the nameplate, GA drawing, size and duty are reviewed.
What duty data is required before quotation?
Provide required flow, head, speed or frequency, liquid, temperature and, when relevant, specific gravity, viscosity and suction conditions.
Can you quote replacement parts as well as complete pumps?
Yes. Complete pumps are the primary supply route. Parts are quoted after the OEM part number and installed configuration are reviewed.
RELATED ENGINEERING RESOURCES
Continue Your Technical Review
ENGINEERING RFQ
Request a Summit 2196 Replacement Quote
Your finder, duty and material selections are carried into this engineering request. Upload a nameplate, GA drawing or datasheet when available.
Engineering review before quotation. Final dimensional fit, hydraulic duty, materials, seal arrangement and site interfaces are confirmed from the submitted data.