G196 SERIES · ANSI / ASME B73.1
G196 ANSI Process Pump Replacement Solution for Goulds 3196 Applications
A documented ANSI B73.1 pump and aftermarket-parts range covering STX, MTX, LTX, and XLTX frames. Send your model, part number, or drawing for engineering cross-reference before quotation.
Documented G196 Series Operating Range
The following values are taken from the Yingsiman G196 product brochure. Final hydraulic selection and configuration are confirmed against the requested duty point.
7,000 GPM
Maximum published capacity (1,364 m³/h).
730 ft
Maximum published head (223 m).
700°F
Maximum published temperature (371°C).
375 PSIG
Maximum published pressure (2,586 kPa).
Manufactured to meet ANSI/ASME B73.1 dimensional requirements. Service limits depend on material, seal arrangement, temperature, pressure, and actual operating conditions.
Frame and Size Coverage
G196 covers the commonly requested ANSI frame families. Use these examples to begin a cross-reference request; engineering confirms dimensions and configuration before release.
STX
Examples: 1×1.5-6, 1.5×3-6, 2×3-6, 1×1.5-8, 1.5×3-8.
MTX / LTX
Examples: 2×3-8, 3×4-8, 1×2-10, 2×3-10, 4×6-13.
XLTX
Examples: 6×8-13, 8×10-13, 6×8-15, 8×10-15, 8×10-15G.
Wet-End Materials and Construction Features
Materials
- CF8M / 316 stainless steel
- CD4MCu duplex stainless steel
- CN7M / Alloy 20
- Hastelloy B and C, Nickel, Titanium, Zirconium
- WCB for suitable non-corrosive services
Published Features
- Open-impeller design and external impeller adjustment
- Bronze or stainless-steel labyrinth bearing isolators
- Standard, large, and taper-bore seal chambers
- SKF or equivalent bearings
- Multiple shaft and shaft-sleeve combinations
Material selection is reviewed against fluid chemistry, concentration, temperature, pressure, solids, seal arrangement, and operating history.
Parts Cross-Reference and Manufacturing Capability
The G196 brochure documents replacement coverage for casings, impellers, covers, adapters, frames, bearing housings, shafts, sleeves, feet, and related components across STX through XLTX.
Quality Controls
- Impeller dynamic balancing
- Casing pressure testing
- Part fit checks and inspection records
- Sand, lost-foam, and V-process casting capability
What to Send
- Pump model, size, and frame
- OEM part number or available drawing
- Photo of nameplate or failed component
- Material, service conditions, quantity, and required delivery date
Engineering Confirmation Before Quotation
01 · Identify
Review model, size, OEM number, drawing, or photo.
02 · Verify
Confirm dimensions, materials, hydraulic duty, and seal needs.
03 · Quote
Provide the applicable configuration, documentation scope, lead time, and quotation.
Brand and OEM references are used only for identification and cross-reference. Final fit and suitability are subject to engineering review of the supplied information.