Home » Products » G196 ANSI B73.1 Chemical Process Pump

PRODUCT SERIES

G196 ANSI B73.1 Chemical Process Pump

Name: G196 Series ANSI Process Pump — Goulds 3196 Interchangeable
Brand: Yingsiman

ANSI B73.1 open-impeller chemical process pump for corrosive and industrial service. Use this page to review the G196 hydraulic envelope, frame range, construction, materials, seal chamber options and installation data before requesting pump selection.

ANSI / ASME B73.1Open ImpellerSTX / MTX / LTX / XLTXExternal Adjustment

View Performance Curves →Browse Pump Sizes Contact Engineer

Product TypeHorizontal ANSI chemical process pump

Frame PlatformSTX · MTX · LTX · XLTX

ImpellerOpen impeller with external adjustment

Seal ChambersStandard bore · Large bore · Taper bore

Product family: G196 Standard: ANSI / ASME B73.1 Engineering use: Product selection & technical review

ProductG196 ANSI Chemical Process Pump

Selection BasisFlow · Head · Fluid · Temperature · Material

Engineering DataCurves · Sizes · Construction · Dimensions

7,000GPM / 1,364 m³/hMaximum capacity

730ft / 223 mMaximum head

700°F371°CMaximum temperature

375PSIG / 2,586 kPaMaximum pressure

PERFORMANCE

Hydraulic coverage

Use the G196 performance coverage charts to screen the likely hydraulic range before reviewing detailed pump curves.

G196 Performance Coverage — Range AClick chart to view full size.

Range A

Range B

SELECTION PATH

Selection inputs

Required flow and total dynamic head
Operating frequency / speed
Process fluid and concentration
Operating temperature
Preferred wetted material

Contact for G196 Selection →

FRAME & SIZE RANGE

Browse G196 by frame

Browse the G196 family by frame, then use the detailed dimensional and curve data to confirm the correct pump size.

STX Sizes

1×1.5-6

1.5×3-6

2×3-6

1×1.5-8

1.5×3-8

MTX / LTX Sizes

2×3-8

3×4-8

3×4-8G

1×2-10

1.5×3-10

2×3-10

3×4-10

3×4-10H

4×6-10

4×6-10H

1.5×3-13

2×3-13

3×4-13

4×6-13

XLTX Sizes

6×8-13

8×10-13

6×8-15

8×10-15

8×10-15G

Available sizes are organized by G196 frame family. Final selection should be confirmed against the required duty point and configuration.

CONSTRUCTION & OPTIONS

Core product architecture

Review the major G196 configuration options for hydraulic selection, materials, sealing arrangements and mechanical configuration.

G196 construction

Open ImpellerOpen impeller design with external impeller adjustment.

Seal ChamberStandard bore, large bore and taper-bore seal chamber options.

Bearing ArrangementSKF or equivalent bearings with labyrinth bearing isolators.

Shaft / SleeveMultiple shaft and shaft-sleeve combinations are available.

MaterialsCF8M / 316SS, CD4MCu, CN7M / Alloy 20, Hastelloy, Nickel, Titanium and other verified project materials.

Standard BoreSeal chamber

Large BoreSeal chamber

Taper BoreSeal chamber

DIMENSIONAL DATA

Installation reference

Review the G196 dimensional drawing for installation planning. Final dimensions should be confirmed against the selected frame, pump size and configuration.

Dimension references

CP / D / XPrimary pump envelope references.

E1 / E2Mounting / centerline references.

F / U / Y / HBase, shaft and installation dimensions.

View Full Dimension Table →

Confirm final dimensions for the selected frame, pump size and configuration before order.

ENGINEERING DATA

G196 product resources

Access the key G196 engineering resources needed for product selection, dimensional review and technical evaluation.

Performance CurvesHydraulic range and detailed pump curves.

Dimensional DataFrame and pump-size installation references.

Materials & ConstructionWetted materials, seal chambers and construction.

G196 Product BrochureProduct overview, frame coverage and verified engineering data.

EXISTING OEM PUMP?

Need to replace an installed Goulds 3196?

Use the dedicated replacement page for installed-model cross-reference, interchangeability verification and replacement scope.

Open 3196 Replacement Guide →

PRODUCT SELECTION

Need help selecting a G196?

Start with what you have. Send flow, total head, process fluid, temperature, preferred material, and any existing pump information available.

After submitting, email drawings, photos, nameplates or datasheets to [email protected]

Include your name and company so supporting files can be matched to the inquiry

Direct contact email

[email protected]

Use the Contact page for the inquiry, then email supporting files to the address above.

Go to Contact Page →Email Miya Zhang